منتج: الرافعة العلوية ذات العارضة المزدوجة القياسية FEM
السعة 20 Tons
Application: Automotive Manufacturing / Production Line Support
Location: Serbia, Europe
Manufacturer: NUCLEON Crane

20-ton-fem-standard-overhead-crane-automotive-factory-serbia (1)
20-ton-fem-standard-overhead-crane-automotive-factory-serbia (4)
20-ton-fem-standard-overhead-crane-automotive-factory-serbia (2)

نظرة عامة على المشروع

هذا 20 ton FEM standard double girder overhead crane project was completed by NUCLEON Crane for an automotive factory in Serbia. Installed above the main assembly line, the industrial bridge crane supports material handling throughout the production process — from component transfer to line-side lifting — helping the plant maintain a smooth, continuous manufacturing flow that meets European FEM design standards.

The crane operates alongside the factory's automated production line, which includes fixture stations, conveyor systems, and assembly tooling, working as an integrated part of the plant's overall material flow.

Project Background & Challenge

As part of Serbia's growing automotive manufacturing sector, the customer required an رافعة علوية engineered to FEM standard classification, while also meeting the practical demands of a modern automotive production environment:

  • FEM classification compliance — the crane needed to be designed to FEM duty class requirements (structural, mechanical, and electrical), aligned with the EN 15011 European crane design standard commonly required by automotive manufacturers in Europe.
  • Integration with production lines — the crane must operate above active assembly lines without interfering with fixed line equipment, conveyors, or overhead utilities.
  • Frequent, precise lifting cycles — automotive component handling requires smooth acceleration/deceleration and accurate positioning to avoid damaging parts or tooling.
  • Workshop headroom constraints — factory buildings are engineered with limited crane hook height, requiring a compact double girder overhead crane design.
  • High-duty, long-term reliability — the crane needs to support continuous multi-shift production with minimal downtime.

The customer needed a heavy duty overhead crane supplier with proven experience delivering FEM standard cranes for the automotive industry in Europe, rather than a generic industrial bridge crane built to non-European codes.

The Solution: 20 Ton FEM Standard Double Girder Overhead Crane

NUCLEON Crane delivered a 20 ton FEM standard double girder overhead crane, installed on elevated runway beams above the automotive assembly workshop in Serbia.

20-ton-fem-standard-overhead-crane-automotive-factory-serbia (3)
20-ton-fem-standard-overhead-crane-automotive-factory-serbia (2)

Key Specifications

ItemDetail
نوع الرافعةFEM Standard Double Girder Overhead (Bridge) Crane
قدرة الرفع المقدرة20 tons
Design StandardFEM classification, in line with EN 15011
FEM Duty ClassSelected per actual production duty cycle and loading spectrum
بناءBox-type double girder, European-style low headroom design
Lifting DeviceEuropean-style electric wire rope hoist
Electrical ComponentsCE-compliant electrical and safety components
Working EnvironmentIndoor automotive manufacturing plant
يتحكمPendant / radio remote control operation
Application AreaProduction line and assembly area material handling

رافعة كهربائية أوروبية

Engineered to FEM Standard

The crane's structural design, hoist configuration, and electrical safety systems follow FEM classification and the EN 15011 European crane design standard, ensuring the equipment meets the technical and safety expectations of automotive manufacturers operating in the EU market. FEM duty class selection accounts for the crane's actual working cycle, load spectrum, and utilization rate — a key requirement for European industrial buyers evaluating crane durability and safety margins.

Optimized for Automotive Factory Integration

The box-girder structure and low-headroom European-style hoist trolley were configured to maximize hook lifting height within the workshop's steel structure, allowing the crane to work efficiently above production line equipment without disrupting layout or clearance requirements — a common challenge in automotive manufacturing plant crane installations.

Smooth, Precision Lifting Performance

Equipped with a European-style wire rope hoist offering stable start-stop control, the crane supports the precision handling required around sensitive automotive tooling and components, reducing the risk of load swing or misalignment during transfer — important for automobile manufacturing crane applications.

Why a 20 Ton FEM Standard Overhead Crane for This Application

  • FEM standard compliance — FEM classification and EN 15011 design give the customer confidence in structural and electrical safety for their Serbian facility.
  • Reliable mid-heavy capacity — 20 tons covers a wide range of automotive component and tooling loads.
  • Compact double girder design — maximizes usable lifting height in workshops with limited headroom.
  • Production-line compatible — engineered to operate safely above active assembly and conveyor systems, suited to automotive production line crane needs.
  • Continuous-duty construction — built for multi-shift automotive manufacturing plant operation with long-term structural reliability.

Project Results

Since installation, the 20 ton FEM standard double girder overhead crane has supported the customer's automotive factory operations in Serbia by providing:

  • Efficient material transfer across the production and assembly workshop
  • Stable, precise lifting compatible with automotive tooling and fixtures
  • Full compliance with FEM standard crane design and EN 15011 safety requirements
  • Dependable performance for continuous multi-shift automobile manufacturing

This crane installation project demonstrates NUCLEON Crane's ability to deliver FEM standard double girder overhead crane solutions for the automotive industry, supporting production line lifting, workshop material handling, and factory logistics for manufacturers across Serbia and the wider European industrial crane market.

About NUCLEON Crane

NUCLEON Crane specializes in the design, manufacturing, and export of FEM standard double girder overhead cranes, gantry cranes, and custom material handling equipment for the automotive, steel, and heavy industrial sectors. With experience supplying FEM/EN 15011-compliant cranes as a trusted overhead crane supplier in Europe, NUCLEON provides end-to-end support from engineering design to installation and after-sales service.

زيارة العميل

Related solutions:

  • الرافعة العلوية ذات العارضة المزدوجة القياسية FEM
  • Overhead Crane Project for Automotive Plants in Europe
  • EN 15011 Compliant Industrial Bridge Crane
  • Heavy Duty Overhead Crane for Automobile Manufacturing

Contact NUCLEON Crane to discuss a customized FEM standard overhead crane project for your automotive factory or production workshop in Europe.

سييرا
سييرا
الرافعات والرفع
أخصائي معدات
رافعة علوية رافعة جسرية رافعة الميناء معتمد من المنظمة الدولية لتوحيد المقاييس
18+
سنوات
120+
المشاريع

مدير أعمال الرافعة الناجح الذي يتمتع بخبرة واسعة في إدارة مشاريع الرفع الثقيل والإشراف التشغيلي. سجل حافل في قيادة نمو الإيرادات وضمان الامتثال لقواعد السلامة.

الحالات ذات الصلة